Was Mike Williams badly injured during the Deepwater Horizon explosion? Oil company BP later tried to blame offshore drilling contractor Transocean for failing to adequately maintain the BOP and control the well ( Chemical Safety Board). As a result, the pipe was only partially cut and a seal could not be made. However, the BOP failed to seal the well, most likely because the drill pipe inside it had buckled due to "effective compression" and was off-center when the blind shear ram attempted to cut the pipe. Jimmy (Kurt Russell) tries to do in the movie. In the moments after the gas on the rig ignited, the crew tried to activate the BOP before abandoning ship, as Mr. The vessel above can then safely disconnect from the well. If those rams and the annular preventers fail to work, the last resort is the blind shear ram, which is supposed to cleanly slice the drill pipe so that it can be sealed off. The BOP is a 4-story, 350-ton stack of hydraulic valves that control powerful rams that can slam tightly shut and seal off the well completely if there's a problem. To help do this, a blowout preventer (BOP) sits on top of the well head. The pressure must be controlled at all times. An enormous amount of pressure exists in the well, ready to unleash oil and gas. Drilling an oil well is a lot like puncturing a balloon. Researching the Deepwater Horizon true story confirmed the rig suffered what in the industry is termed a "blowout," a sudden surge of oil and gas that bursts out of the well.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |